当前位置:欢乐生肖 > 电机品牌 > 意大利ELPROM电机

电机品牌

Motor brand

ELPROM电机

中文名称:ELPROM电机
厂        家:
产        地:美国

品牌简介:

意大利ELPROM成立于1991年,是领先的电子产品制造和供应商。它的一些技术应用在广泛的高科技产业和最先进的公司。ELPROM高效率的制造工艺是一个强有力的竞争优势。此外ELPROM能够为它的客户提供服务,如小批量制造,修理和整修设施。
意大利ELPROM在重电行业里有50多年的制造传统,尤其在电力变压器及相关设备上颇具经验与心得。近年来在欧洲也取得良好的业绩。
1949年产品包括ELPROM变压器、ELPROM电机以及ELPROM发电设备等。1952年生产第一台有载分接ELPROM开关,并逐渐成为了世界上主要的有载分接开关专业生产厂家。1958年分为三大厂:开关设备、电机和变压器厂。

Single Phase Asynchronous Motors

We manufacture single phase motors with permanent capacitor or  with run capacitor and  start  capacitor  equipped  with centrifugal or electronic switch .   Motor range from  IEC 56  up to IEC 100 frame size in aluminum housing in 2-4-6 pole.available mountings are B3-B5-B14-B3/B5 –B3/B14. The motors could be offered with UL/CSA approval on demand.


Gearboxes Asynchronous Motors

The new asynchronous three-phase and single phase motors  range comes from an attentive and careful project developed with clients specifications, The target application is the  gearbox. all the motors are B5 or B14 Model, with phase insulation  in 2  and  4 pole. Orange1 Group approved motors.



Three Phase Asynchronous Motors

One speed or two speeds three phase motors manufactured in accordance with different specifications  requested by the clients. available in 2-4-6-8 pole from 0,09 kW up to 30 kW, in aluminum housing IEC 56 up to IEC 180. UL/CSA approval available on demand.



Inverter Duty Motors

These motors are designed to work with frequency inverter, with  force ventilation system to ensure maximum cooling power after prolonged running at significantly low speed. Special setting to carry encoder able to monitor the speed of the motor . Special solutions  to ensure perfect functioning of bearings in addition to special winding.



IE2 and iE3 High efficiency Asynchronous motors

We are constantly researching new ways to achieve high performances while meeting requirements for effective energy savings.Motors are available from size 80 to size 180, in 2-4-6 pole in continuous duty from 0,75 kW up to 40 kW, in extruded or casted aluminum housing. available mountings are B3-B5-B14-B3/B5 –B3/B14.



Gradual Brake Motors (FPC)

Motors  equipped  with  brake  offering a  gradual and silent brake stop  of the moving parts in accordance with the regulation of safety in workplace. The motors are made in single and three phase, single or double speed, 2-4-6-8 poles from 0,13 kW up to 18,5 kW. On demand it is available IE2 efficiency, uL approved.



High torque brake Motors (FhC-Fha)

Suitable for all the application where it’s necessary a sudden and precise braking. available with DC or ac brake,single or three phase, single or double speed in 2-4-6 and 8 poles up 30 kW with different custom made settings. uL approval on demand.



Motors for Burners

The motors are designed for gas and fuel burners, hot air generators and drying kilns。 They have reduced dimensions and increased protection, from IP20 to IP55 in class F or h insulation。 They have the possibility of coupling to different flanges depending on the power。  On demand they are available  with double shaft configuration and  flexible coupling  to be directly applied to the pump。



Low centre Motors

This range of motors will be used in application where high power is combined to low centre. available with blade discs or  flange. Special arrangements with collet chuck shaft end on demand. Motors are made for inverter duty in 2 and 4 pole single and three phase. Available with Gradual brake and /or uL approval from 0,25 kW up to 15 kW.



Motors for Hydraulic pumps

Powerpack range  is made for Oil hydraulic application, it has a special designed flange and shaft for coupling the motor directly on the pump, additional flange or bell interface are not required. The squared flange match all the pumps body standards. The shaft could be custom made and hardened.



Hollow shaft Motors

Motors for high pressure pumps with hollow shafts are designed for direct coupling  to reach a perfect alignment  between the electric motor and the majority of hydraulic pumps. These motors guarantee high performance, reliability and efficiency.available in single and three phase, standard or with elastic coupling on IE2 on Demand.


Motoinverter

These motors are improved with a frequency inverter  integrated  into  the  reduced terminal box. This solution offer room saving,absence of shielded cables from inverter to the motor, an easier installation with high protection rate (IP55). The motors are designed according the application and it could be implemented with an integrated filter on demand.



Atex Motors Ex d

Motors in conformity with the Essential health and Safety Requirements for potentially explosive  atmospheres  according  to European Standards. Three phase and Single phase asynchronous motors, single and double speed. Completely modular aluminum motors with removable feet and flanges. Flameproof enclosures for Zone1-2-21-22 . available from size IEC56 to IEC132.



Atex Motors Ex de

The motors combine the flameproof enclosure of the Ex d to the Increased safety of the Ex e. They have been designed to be used in presence of explosive atmosphere. available in single and three phase, in single and double speed, from size IEC56 to Size IEC132.

Atex Motors Ex e

Increased Safety Motors to be applied in surface plants were en explosive atmosphere can occur. available in single and three phase, in single and double speed, from size IEC56 to Size IEC160.



Encapsulated Water Proof Motors

We have developed a process using a special resin material that makes the  electric internal parts of the motors completely waterproof。 The motors are resistant to the most hostile environments in terms of presence of water and humidity。 all the motors of our range could be manufactured with this technology with no restrictions。



Atex Motors Ex nA

Motors non sparking to be applied in Zone classified the presence of explosive atmosphere  rarely  occurs  in  normal operation and in short period. Available in single and three phase, in single and double speed, from size IEC56 to Size IEC160.



Under oil Motors

This range of motors is designed to work under hydraulic oil and it can be used coupled directly with hydraulic geared pumps. The power pack will be completely submersed into the oil tank. Flange and shaft couple with the most common geared hydraulic pumps.



Open Motors

Different  applications  especially  in machines  or  tools  connected  with automotive  industries  demand  for Open Motors supplied with two end shields instead of motor housing. We manufacture single and three phase motors in 2-4-6 and 8 pole in a large range of powers and sizes.




幸运飞艇官网 快乐赛车官网 广西快3走势 韩国1.5分彩 秒速时时彩 荣鼎彩开奖 贵州快3 幸运飞艇官网 亚洲彩票 欢乐生肖